Model simulation analysis of superconducting switch applied to high-temperature superconducting electromagnetic suspension magnet

Lei Wang; Mingtian Xing; Luoyuan Wang

doi:10.54254/2977-3903/9/2024086

Article Information

Received: 18 July 2024

Published: 31 July 2024

DOI: https://doi.org/10.54254/2977-3903/9/2024086

Article Type: Research Article

Cite this article

Wang,L.;Xing,M.;Wang,L. (2024). Model simulation analysis of superconducting switch applied to high-temperature superconducting electromagnetic suspension magnet. Advances in Engineering Innovation,9,42-46.

Data availability

The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.

Disclaimer/Publisher's Note

The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of EWA Publishing and/or the editor(s). EWA Publishing and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

About this Volume

Volume Title: AEI Vol.9

Part of Series: Advances in Engineering Innovation

ISSN: 2977-3903 (Print) / 2977-3911 (Online)

Copyright & License

[1]Liu, S., Wang, L., Wang, L., & others. (2023). A review of electric levitation trains and on-board superconducting magnets. Journal of Southwest Jiaotong University, 58(01), 734-753.

[2]Michael, P. C., Qu, T., Voccio, J., Bascunan, J., Hahn, S., & Iwasa, Y. (2017). A REBCO Persistent-Current Switch (PCS): Test Results and Switch Heater Performance. IEEE Transactions on Applied Superconductivity, 27(4), 1-5.

[3]Takahashi, K., & others. (2018). Performance of an HTS Persistent Current System for REBCO Pancake Coil. IEEE Transactions on Applied Superconductivity.

[4]Geng, J., & others. (2016). HTS Persistent Current Switch Controlled by AC Magnetic Field. IEEE Transactions on Applied Superconductivity, 26(3).

[5]Nakai, N., Yamano, S., Sakamoto, H., & Mukoyama, S. (2017). Persistent superconducting joint of REBCO tapes for HTS-MRI magnets. Presented at the 13th European Conference on Applied Superconductivity, Geneva, Switzerland, September 17-21.

[6]Wang, Y. (2011). Fundamentals of superconducting power technology. Beijing: Science Press, 10-24, 90-97.

[7]Heinrich, A., Muller, J., Hiebl, A., & Numssen, K., & others. (2001). YBCO Thin Films as Active High-Power Switches. IEEE Transactions on Applied Superconductivity, 11(1), 1952-1955.

[8]Tosaka, T., Kuriyama, T., Yamaji, U., & others. (2004). Development of a Persistent Current Switch for HTS Magnets. IEEE Transactions on Applied Superconductivity, 14(2), 1218-1221.

[9]Chan, W. K., Masson, P. J., Luongo, C. A., & others. (2009). Influence of Inter-Layer Contact Resistances on Quench Propagation in YBa2Cu3Ox Coated Conductors. IEEE Transactions on Applied Superconductivity, 19(3), 2490-2495.

[10]Breschi, M., Ribani, P. L., Wang, X., & others. (2007). Theoretical explanation of the non-equipotential quench behavior in Y–Ba–Cu–O coated conductors. Superconductor Science & Technology, 20(4), L9-L11.