Design of 20CrMnTiNGW planetary gear transmission and force analysis of gears

Rongrong Dai; Chenglei Zhao; Jian Zhao; Di Wang

doi:10.54254/2977-3903/2025.29452

Article Information

Received: 28 October 2025

Published: 10 November 2025

DOI: https://doi.org/10.54254/2977-3903/2025.29452

Article Type: Research Article

Cite this article

Dai,R.;Zhao,C.;Zhao,J.;Wang,D. (2025). Design of 20CrMnTiNGW planetary gear transmission and force analysis of gears. Advances in Engineering Innovation,16(10),142-147.

Data availability

The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.

Disclaimer/Publisher's Note

The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of EWA Publishing and/or the editor(s). EWA Publishing and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

About this Journal

Journal: Advances in Engineering Innovation

Volume: Vol.16, Issue 10

ISSN: 2977-3903 (Print) / 2977-3911 (Online)

Copyright & License

[1]Korkmazel, M. and Erden, A. (2001) “Functional Design Tree for Mechatronic Projects in Mechanical Engineering Design Course, ” in Mechanical Engineering Design Education: Issues and Case Studies. American Society of Mechanical Engineers, pp. 43–47. Available at: https: //doi.org/10.1115/imece2001/de-23286.

[2]Marimuthu, P. and Muthuveerappan, G. (2016) “Design of asymmetric normal contact ratio spur gear drive through direct design to enhance the load carrying capacity, ”Mechanism and Machine Theory, 95, pp. 22–34. Available at: https: //doi.org/10.1016/j.mechmachtheory.2015.08.013.

[3]Jiang, W. (2012) “Interactive Electronic Technical Manual design of CNC machine tool, ” in 2012 2nd International Conference on Consumer Electronics, Communications and Networks (CECNet). IEEE, pp. 2663–2666. Available at: https: //doi.org/10.1109/cecnet.2012.6201629.

[4]Shaw, J. and Smith, P.H. (2019) “Compilation of DOE Manual 441.1-1 Working Group Meeting Presentations.” Office of Scientific and Technical Information (OSTI). Available at: https: //doi.org/10.2172/1570595.

[5]Kahraman, A. (1999) “Static Load Sharing Characteristics of Transmission Planetary Gear Sets: Model and Experiment, ” in SAE Technical Paper Series. SAE International. Available at: https: //doi.org/10.4271/1999-01-1050.

[6]Pedersen, N. (2014) “On optimization of internal/external spur gears tooth bending strength, ” in Engineering Optimization 2014. CRC Press, pp. 217–218. Available at: https: //doi.org/10.1201/b17488-40.

[7]Wang, J. et al. (2025) “Analysis of Loaded Contact Characteristics of Non-Circular Planetary Gear Train.” Elsevier BV. Available at: https: //doi.org/10.2139/ssrn.5093265.

[8]Arnaudov, K. and Karaivanov, D.P. (2019) “I -Planetary Gear Train (K-H-V Gear Train), ” in Planetary Gear Trains. CRC Press, pp. 245–250. Available at: https: //doi.org/10.1201/9780429458521-27.